Simrad FS25 Uživatelská příručka stáhnout pdf (Strana 48)

FS 20/25 Operators Manual 901-10037001/1.1

FS 20/25 Installation, System Set-Up and Test Page 4.11

Kongsberg Simrad Mesotech Ltd.

Port Coquitlam, BC - Canada

4.4.2 Power-Up Configuration

For the system to operate properly, the trawl unit configuration must be selected

correctly. In addition, modification of these power-up configuration parameters is

done in a special mode selected after power-up of the HP/PC processor unit.

The following sections describe the process of configuring these parameters. These

steps must be followed only when the system is powered-up for the first time or when

you have to replace the HP/PC processing unit or the TTM Module assembly.

4.4.3 FS 20Start-up Procedure

For the purpose and demonstration on the Start-up Procedure in this chapter, we

are using an HP/PC processing unit that has only 2 Com ports, Com 1 and Com 2.

The Com 1 port from the HP/PC processing unit is connected to the FS20/25 TTM

module RS 232 port “A”. No connection is made to the Com 2 or to the “B” port of

the TTM module.

We will be using a TS15 S 330kHz Trawl Sonar Head with the 200kHz net sounder

option and an FS3300 sensor module.

The first step after a successful power up is to configure the system for the desired

“User Setting” operating mode and set-up, if not already done; you will automatically

select “Generic”. Clicking on “Generic” or clicking on specific types of fishery does

this. Refer to the following window.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 107 108

Žádné komentáře

Simrad FS25 Uživatelská příručka Strana 48