Simrad SP270 Instalační manuál Strana 32

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 254
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 31
Simrad SP270
18
851-160571 / B
Dehumidifier
Place a suitably sized bag of desiccant material (silica gel or
similar) into the unit to keep the electronic components as dry as
possible.
Coatings
Spray the unit externally with a corrosion inhibitor (e.g. a light
oil) before packing.
Re-packing
The unit should be stored and transported in its original packing
material and/or crate. In the event that this material is not
available, proceed as follows:
Small units must be protected from damp by being placed
within a plastic bag at least 0.15 mm thick. An appropriate
quantity of desiccant material should be placed inside this
bag, and the bag sealed. The sealed unit must then be placed
in an appropriate carton or crate, and supported in the
container by appropriate shock-absorbing insulation
(polystyrene foam chips etc.).
Large units must be placed in a suitable cardboard box or
wooden crate. The unit must be protected against physical
damage by means of shock-absorbing insulation mats. The
box must be clearly marked with its contents, and must be
stored in a dry and dust-free area.
ESD precautions
Electrostatic Discharge (ESD)
Electro-Static Discharge (ESD) is the transfer of an electrostatic
charge between two bodies at different electrostatic potentials,
caused either by direct contact or induction by an electrostatic
field.
The passing of a charge through an electronic device can cause
localised overheating, and it can also “puncture” insulating
layers within the structure of the device. This may deposit a
conductive residue of the vaporised metal on the device, and
thus create a short circuit. This may result in a catastrophic
failure, or degraded performance of the device.
ESD Protection during transport and storage
Sensitive electronic equipment must be transported and stored in
protective packing bags, boxes and cabinets. The equipment
must NOT be transported or stored close to strong electrostatic,
electro-magnetic or radioactive fields.
Zobrazit stránku 31
1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 253 254

Komentáře k této Příručce

Žádné komentáře